4 Tips for Effective Hose Maintenance

If you do not have a good maintenance program for your hose, you will reduce its time of service even if you picked and installed good quality hose connectors fittings. The risk from potential failure, the severity of its application, and the experience you take a hose will determine how you are going to conduct the replacement. You need to replace water hose fittings, gas hose fittings, and hose connectors before they fail or get damaged. You have to establish a maintenance program that has the following actions:

Inspect the Hose Connectors Fittings Visually

It is important to inspect the assembly of the hose regularly. Shut down and replace the hose assembly when the following conditions are present:

  • Cracked, damaged, or abraded cover
  • Fitting slippage on the hose
  • Stiff, hard, charred, or heat cracked hose
  • Kinked, flattened, crushed, or twisted hose
  • Degraded, loose, or softcover
  • Excess build-up of dirt
  • Worn guards, clamps, or shields

Perform a Functional Test

Operate the system and check for potential malfunctions at maximum operating pressure. Avoid potential hazards as you conduct the test. Ensure that you avoid taking the hose beyond its maximum pressure. At the same time, ensure that the peak and surge are below this point.

Conduct Replacement Intervals

Elastomeric seals and hose assemblies used on hose adapters and fittings will wear out or harden under compression and thermal cycling. Inspect these areas at specific intervals based on the past service life, or industry recommendations, or when you think that failure can cause downtime in operations. In some cases, they may be subject to chemical or internal wear from the liquid they convey, causing it to fail without notice.

Hose Failure

Hydraulic power is effected by transferring fluids under high pressure. Fittings, hoses, and hose assemblies are part of what constitutes hydraulic power. Fluids can be dangerous while under pressure, therefore, you should exercise extreme caution when working with high-pressure fluids, and holding the hoses that transport the fluid. In case the hoses are applied falsely, or they fail to perform, they can wear and tear. When they fail, the high-pressure fluids can cause harm to the user. Avoid finding the leak through touch.

When the hose fails, shut down the equipment and step away. Once the pressure is reduced to zero, you can take off the hose assembly and examine it. Since air hose fittings for sale are easy to find, replace the damaged unit with a new one, and avoid patching a hose assembly unit.

Conclusion

Hose fittings UK are common in repair shops in your locality. Always take the process of maintaining your hose assembly with seriousness to maintain a strong operation of your service. Once you have a good program for maintenance, you can keep your equipment and staff safe.

Avatar

admin Author

Leave a Reply

Your email address will not be published. Required fields are marked *